Indoor

Double-core heating mats with aluminum foil FMD

features

Double-core heating mats with aluminum foil FMD
  • The best solution for premises with low ceilings
  • Cost and energy saving system
  • Wide range of heating cable power outputs
  • Approved long-life performance
  • Self-adhesive mats
  • Simple installation

Our double-core heating mat FMD is applied as a supplementary system for comfortable floor heating. The aluminum foil ensures a homogenous heat output. Therefore the mat can be used under laminate and parquet. It is applicable for all types of premises and can be easily installed both on a new surface or on the existing floor in case of repair works, especially when it is highly important to keep a low thickness of the floor construction.

The double-core heating mat FMD is made of a double-core cable, attached to the aluminum foil. The heating mat is provided with a cold lead, a reliable coupling, for the electrical connection of the system, and an end termination. The double-core design of the heating cable enables to provide electric power supply from one end of the mat. Opposed to the single-core cable you do not need to reroute a second cold lead to the power supply which makes the process of installation easier and faster. The cables are fixed on the mesh with constant wire distances. Thanks to the cable fixation on the mesh there is no need to adjust the wire distances to fix the cable on the floor surface, which can by chance lead to the damage of the wire during the process of installation.

Technical data

rated voltage 230 VAC
power 150 W/m²
maximum operation temperature 80 °C
minimum operation temperature -10 °C
minimum storage temperature -20 °C
minimum installation temperature -10 °C
installation width 0.50 m
cable diameter ~ 1.18 mm - 1.62 mm
cold lead length 4 m
cold lead cross section up to 4 m²: 2x0.5 mm²
from 5 m² up to 9 m²: 2x0.75 mm²
for 10 m²: 2x1.0 mm²
certifications CE

Double-core heating mat with aluminum foil FMD 150 W/m²

type power, W area, m² specific resistance at 20°C, Ω
FMD-75-0.50/150 75 0.50 665,80 - 771,10
FMD-112-0.75/150 112 0.75 465,92 - 539,77
FMD-150-1.0/150 150 1.00 342,36 - 396,57
FMD-150-1.5/225 225 1.50 217,80 - 252,45
FMD-150-2.0/300 300 2.00 154,98 - 179,95
FMD-150-3.0/450 450 3.00 103,40 - 120,70
FMD-150-4.0/600 600 4.00 79,26 - 91,77
FMD-150-5.0/750 750 5.00 62,04 - 73,41
FMD-150-6.0/900 900 6.00 52,32 - 61,15
FMD-150-7.0/1050 1050 7.00 41,23 - 47,74
FMD-150-8.0/1200 1200 8.00 36,23 - 41,96
FMD-150-9.0/1350 1350 9.00 31,58 - 36,57
FMD-150-10.0/1500 1500 10.00 28,81 - 33,36

certifications

CE

Double-core heating mats with aluminum foil FMD

features

  • The best solution for premises with low ceilings
  • Cost and energy saving system
  • Wide range of heating cable power outputs
  • Approved long-life performance
  • Self-adhesive mats
  • Simple installation
Double-core heating mats with aluminum foil FMD

description

Our double-core heating mat FMD is applied as a supplementary system for comfortable floor heating. The aluminum foil ensures a homogenous heat output. Therefore the mat can be used under laminate and parquet. It is applicable for all types of premises and can be easily installed both on a new surface or on the existing floor in case of repair works, especially when it is highly important to keep a low thickness of the floor construction.

The double-core heating mat FMD is made of a double-core cable, attached to the aluminum foil. The heating mat is provided with a cold lead, a reliable coupling, for the electrical connection of the system, and an end termination. The double-core design of the heating cable enables to provide electric power supply from one end of the mat. Opposed to the single-core cable you do not need to reroute a second cold lead to the power supply which makes the process of installation easier and faster. The cables are fixed on the mesh with constant wire distances. Thanks to the cable fixation on the mesh there is no need to adjust the wire distances to fix the cable on the floor surface, which can by chance lead to the damage of the wire during the process of installation.


Technical data

Design

rated voltage 230 VAC
power 150 W/m²
maximum operation temperature 80 °C
minimum operation temperature -10 °C
minimum storage temperature -20 °C
minimum installation temperature -10 °C
installation width 0.50 m
cable diameter ~ 1.18 mm - 1.62 mm
cold lead length 4 m
cold lead cross section up to 4 m²: 2x0.5 mm²
from 5 m² up to 9 m²: 2x0.75 mm²
for 10 m²: 2x1.0 mm²
certifications CE

Product References

Double-core heating mat with aluminum foil FMD 150 W/m²

type power, W area, m² specific resistance at 20°C, Ω
FMD-75-0.50/150 75 0.50 665,80 - 771,10
FMD-112-0.75/150 112 0.75 465,92 - 539,77
FMD-150-1.0/150 150 1.00 342,36 - 396,57
FMD-150-1.5/225 225 1.50 217,80 - 252,45
FMD-150-2.0/300 300 2.00 154,98 - 179,95
FMD-150-3.0/450 450 3.00 103,40 - 120,70
FMD-150-4.0/600 600 4.00 79,26 - 91,77
FMD-150-5.0/750 750 5.00 62,04 - 73,41
FMD-150-6.0/900 900 6.00 52,32 - 61,15
FMD-150-7.0/1050 1050 7.00 41,23 - 47,74
FMD-150-8.0/1200 1200 8.00 36,23 - 41,96
FMD-150-9.0/1350 1350 9.00 31,58 - 36,57
FMD-150-10.0/1500 1500 10.00 28,81 - 33,36

certifications

CE

DSC-2515-FMD-ID